Recruitment | Application Open | Last Date: 18 November 2026, 11:45 PM
Bharat Heavy Electricals Limited (BHEL) has invited applications for 660 Artisan Grade-IV vacancies under Advertisement No. 01/2026, officially titled Artisan Recruitment – 2027. The recruitment covers seven technical trades across nine manufacturing units in India.
Candidates generally need Class 10, a National Trade Certificate (NTC/ITI) and a National Apprenticeship Certificate (NAC) in the relevant trade, subject to the prescribed marks and eligibility conditions.
Online applications opened on 21 October 2026 and will close on 18 November 2026 at 11:45 PM. The Computer Based Examination is tentatively scheduled for 11 December 2026.
Applicants should pay particular attention to the mandatory trade qualifications, the restriction to one unit and one trade, and BHEL's long-term posting condition.
BHEL Artisan Recruitment 2027: Overview
ParticularsDetails
OrganisationBharat Heavy Electricals Limited (BHEL)
RecruitmentArtisan Recruitment – 2027
Advertisement No.01/2026
PostArtisan Grade-IV
Vacancies660 (tentative)
TradesSeven
Manufacturing UnitsNine
QualificationClass 10 + NTC/ITI + NAC in the respective trade, subject to notified conditions
Application ModeOnline
Application Deadline18 November 2026, 11:45 PM
Age Reference Date1 October 2026
Initial Monthly Wages₹24,000 during the one-year temporary period
Pay Scale After Regularisation₹29,500–₹65,000 plus applicable allowances
SelectionComputer Based Examination, Document Verification and qualifying Skill Test
Tentative Examination Date11 December 2026
Official WebsiteBHEL Careers
Although the recruitment is titled Artisan Recruitment – 2027, the application process and tentative examination date fall in 2026.
BHEL Artisan Vacancy 2027: Trade-Wise Details
The 660 vacancies are distributed across seven trades.
TradeVacancies
Fitter278
Welder104
Machinist101
Electrician90
Turner52
Electronics Mechanic23
Foundryman12
Total660
Fitter accounts for the largest number of vacancies, followed by Welder and Machinist.
However, candidates should not select a trade based only on its overall vacancy count. The number of available posts differs between manufacturing units, and candidates must apply in the trade for which they hold the prescribed qualifications.
The advertised vacancies are tentative and may change following BHEL's further assessment.
Manufacturing Unit-Wise Vacancies and Job Locations
BHEL has identified the following manufacturing units for this recruitment.
Manufacturing UnitLocationVacancies
Boiler Auxiliaries Plant (BAP)Ranipet, Tamil Nadu75
Heavy Plates and Vessels Plant (HPVP)Visakhapatnam, Andhra Pradesh120
Electronics Division (EDN)Bengaluru, Karnataka45
Solar Business Division (SBD)Bengaluru, Karnataka30
Heavy Electrical Equipment Plant (HEEP)Haridwar, Uttarakhand60
Heavy Power Equipment Plant (HPEP)Hyderabad, Telangana60
Heavy Electrical Plant (HEP)Bhopal, Madhya Pradesh60
Transformer Plant (TP)Jhansi, Uttar Pradesh60
High Pressure Boiler Plant (HPBP)Tiruchirappalli, Tamil Nadu150
Total
660
The highest number of vacancies is at the High Pressure Boiler Plant in Tiruchirappalli, followed by the Heavy Plates and Vessels Plant in Visakhapatnam.
Important: There is no manufacturing unit in West Bengal among the nine units listed for this recruitment. Candidates seeking employment in a particular state should consider the posting conditions carefully.
Category-wise reservation
The detailed advertisement also gives unit-wise category reservations.
Across the nine units, the published tables show:
CategoryAdvertised Vacancies
Unreserved (UR)285
EWS65
OBC162
SC115
ST33
Total660
The advertisement separately identifies 90 Ex-Servicemen (EXSM) vacancies and 45 PwD vacancies across the units. These are reservation figures within the advertised recruitment, not additional posts to be added to 660.
Candidates should check both the trade-wise distribution and unit-wise reservation details before selecting their application options.
Educational Qualification for BHEL Artisan Grade-IV
Applicants must satisfy the essential qualifications prescribed for their respective trade.
The original advertisement requires:
Class 10 pass.
National Trade Certificate (NTC/ITI) in the relevant trade.
National Apprenticeship Certificate (NAC) in the relevant trade.
The minimum percentage requirement is:
CategoryMinimum Marks
General and OBC60% in NTC/ITI and 60% in NAC
SC and ST55% in NTC/ITI and 55% in NAC
Both qualifications must separately meet the applicable percentage requirement. A high percentage in one certificate does not automatically compensate for marks below the prescribed minimum in the other.
The original advertisement specifies these percentages for General/OBC and SC/ST candidates. EWS applicants should confirm the applicable academic standard in BHEL's detailed instructions and FAQs.
BHEL also specifies that only full-time regular courses will be considered and that the NAC must be issued by the concerned authority.
Knowledge of the relevant regional language is desirable for units in Tamil Nadu, Telangana, Andhra Pradesh and Karnataka. Hindi knowledge is desirable for the other units.
Latest reported corrigendum: ITI/NAC certificate deadline
A corrigendum reported as issued by BHEL on 26 October 2026 revises an important provision relating to ITI/NAC certificates and marksheets.
ConditionOriginal AdvertisementReported Revised Provision
Deadline for acquiring requisite ITI/NAC certificates or marksheets1 October 2026Date of Document Verification cum Skill Test
This reported change is particularly relevant to candidates whose trade certificates or marksheets were not available by the original date.
However, it should not be interpreted as removal of the essential qualification, prescribed marks or trade requirements. Applicants must satisfy the applicable conditions and consult the official corrigendum through BHEL Careers before relying on the revised deadline.
Special provision for Ex-Servicemen
The advertisement provides for Ex-Servicemen claiming an equivalent trade qualification.
Such candidates must produce the required trade-equivalency certificate issued by the appropriate Army, Air Force or Naval institute.
The original notification states that the minimum percentage-of-marks requirement does not apply to Ex-Servicemen claiming the notified trade equivalency.
This is a specific documentary concession, not an automatic exemption from every educational or trade requirement. Applicants should verify that their service qualification is accepted for the trade selected.
BHEL Artisan Age Limit 2027
The upper age limit is calculated as on 1 October 2026.
CategoryUpper Age Limit / Relaxation
General / EWS27 years
OBC (Non-Creamy Layer)3 years' relaxation
SC / ST5 years' relaxation
PwD — General10 years' relaxation
PwD — OBC (NCL)13 years' relaxation
PwD — SC / ST15 years' relaxation
Ex-ServicemenAs per applicable Government rules
Candidates may also be eligible for age relaxation based on relevant work experience, up to a maximum of seven years, subject to at least six months of qualifying experience and submission of the prescribed experience certificate.
The advertisement additionally provides five years' relaxation for eligible candidates ordinarily domiciled in Jammu and Kashmir during the specified period from 1 January 1980 to 31 December 1989.
Maximum age after all permissible relaxations: 56 years as on 1 October 2026.
Age relaxations should not be added together automatically without checking the applicable BHEL conditions.
Check Your Age Online — ExamPrep India Age Calculator
Enter your date of birth and the official reference date, 1 October 2026, to calculate your age. The calculator does not independently determine eligibility for category-based relaxations.
BHEL Artisan Application Fee 2027
CategoryExamination FeeProcessing FeeTotal
UR / EWS / OBC₹600₹400 + GST₹1,072
SC / ST / PwD / Ex-ServicemenNil₹400 + GST₹472
The application and processing fees are non-refundable.
Additional bank transaction charges may apply depending on the payment method.
Important clarification: SC, ST, PwD and Ex-Servicemen candidates are exempt from the examination fee, but they must still pay the applicable processing fee.
BHEL Artisan Salary and Employment Conditions
BHEL has specified two stages of employment.
First year: Temporary Artisan
Selected candidates will initially work as Temporary Artisans for one year.
During this period, they will receive consolidated wages of ₹24,000 per month.
After regularisation
After successful completion of the temporary period, candidates will be regularised in the BHEL establishment as Artisan Grade-IV, subject to the company's rules.
The prescribed pay scale is ₹29,500–₹65,000, with applicable allowances.
The amount of ₹29,500 represents the minimum of the regular pay scale, not the guaranteed take-home salary during the initial temporary period.
Important posting condition: 20-year unit service
This is one of the most significant conditions in the advertisement.
Selected candidates are required to serve at their allotted manufacturing unit for at least 20 years from joining.
BHEL states that transfer or change-of-posting requests will not be entertained during this period.
The advertisement separately describes a limited provision under which an exceptional transfer request arising from unavoidable personal circumstances may be considered, subject to a suitable position being available and reversion to the original post.
Candidates should not treat this provision as an assurance of transfer.
Before selecting a manufacturing unit, consider whether you are prepared to work at that location for a long period.
BHEL Artisan Selection Process 2027
The selection process has two mandatory stages.
Stage 1: Computer Based Examination (CBE)
Eligible candidates must appear for the Computer Based Examination in their respective trade.
BHEL will shortlist candidates for the next stage in order of merit, generally in the ratio of 1:3 against the vacancies in the relevant trade, category and manufacturing unit.
Where only one vacancy is available in a particular trade/category, up to five candidates may be shortlisted.
The minimum qualifying marks prescribed in the detailed advertisement are:
CategoryMinimum Qualifying Marks
UR / EWS40%
OBC (NCL) / SC / ST30%
The notification also provides relaxation for eligible PwD and Ex-Servicemen candidates in the shortlisting process, subject to lower minimum qualifying thresholds.
For such eligible candidates, the relaxed minimum may go down to:
30% for UR/EWS.
22.5% for OBC/SC/ST.
These are minimum eligibility thresholds for shortlisting, not guaranteed selection cut-offs. Actual shortlisting will depend on vacancies, marks and the applicable category-wise merit process.
Computer Based Examination pattern
A separately listed BHEL Artisan examination-pattern document is reported to prescribe the following structure. Candidates should confirm this against the current official examination-pattern PDF before relying on it.
SubjectQuestions
Trade-related questions70
Engineering / Calculations30
Reasoning20
Total120
The reported examination scheme provides:
Duration: 90 minutes.
Four-option multiple-choice questions.
One mark for each correct answer.
Negative marking of 0.25 mark for each incorrect answer.
The detailed advertisement refers to merit marks out of 100, while the separately reported examination pattern contains 120 one-mark questions. Applicants should consult BHEL's official examination-pattern and updated instructions for any clarification on score conversion.
The recruitment advertisement states that the examination will be trilingual, with Hindi, English and an applicable third-language option as notified by BHEL.
Stage 2: Document Verification and Skill Test
Candidates shortlisted from the CBE will undergo document verification and a Skill Test.
The Skill Test is qualifying in nature.
Candidates must satisfy the eligibility requirements at document verification and qualify in the Skill Test.
Final merit will be prepared on the basis of CBE performance after the candidate has been found eligible and has qualified in the Skill Test.
A medical examination will also be required before appointment, according to BHEL's prescribed medical standards.
Important Dates
EventDate
Application Opens21 October 2026, 10:00 AM
Age Reference Date1 October 2026
Reported Qualification Corrigendum26 October 2026
Last Date to Apply18 November 2026, 11:45 PM
Tentative Computer Based Examination11 December 2026
Document Verification / Skill TestDate to be announced
The advertisement states that scheduled dates may change. Candidates should check the official BHEL recruitment website for subsequent notices.
How to Apply for BHEL Artisan Recruitment 2027
Applications must be submitted online through the official BHEL Careers website.
Visit BHEL Careers.
Open the Artisan Recruitment – 2027, Advertisement No. 01/2026 section.
Read the detailed advertisement, latest corrigendum, vacancy breakup and application instructions.
Check the availability of vacancies in your eligible trade at the manufacturing unit you want to select.
Complete the online application with accurate personal, category and qualification details.
Select the permitted manufacturing unit and trade carefully.
Upload the documents requested by the application portal and pay the applicable fee.
Review the completed application before final submission.
Save the submitted application details and payment confirmation for future reference.
BHEL permits applications for one manufacturing unit and one trade only.
If a candidate submits multiple online applications, the advertisement states that only the last submitted application will be treated as final.
Candidates may indicate up to five examination-centre preferences, subject to BHEL's right to modify or allocate examination venues.
Important Documents and Candidate Instructions
Depending on the candidate's category and circumstances, the relevant documents may include Class 10 records, NTC/ITI and NAC certificates or marksheets, reservation certificates, experience certificates, trade-equivalency documents and other proofs required in the official instructions.
Some particularly important conditions are:
OBC (NCL): The prescribed certificate must have been issued on or after 1 January 2026.
EWS: The certificate must be valid for financial year 2026–27 and based on the prescribed income and asset assessment period.
Ex-Servicemen: The notification specifies an undertaking relating to prior civil employment, as applicable to candidates seeking Ex-Servicemen benefits.
Government/PSU employees: Candidates may need to apply through the proper channel or produce a No Objection Certificate at document verification.
PwD candidates: The applicable benchmark-disability certificate and prescribed supporting documents must be produced.
All applicants: Name and other important personal information must match the official records and the instructions in the application form.
Applicants should retain an active email address, as BHEL may communicate recruitment information electronically.
What Candidates Should Check Before Applying
Three conditions deserve particular attention.
1. ITI alone is generally not sufficient. The recruitment normally requires both the National Trade Certificate and the National Apprenticeship Certificate in the relevant trade, subject to notified equivalency provisions.
2. The manufacturing unit is a long-term decision. BHEL's 20-year service requirement means candidates should carefully assess the location before applying.
3. The Skill Test is compulsory but qualifying. Candidates must pass it, while the final merit ranking is based on the applicable CBE score after verification of eligibility.
Candidates should also verify the reported revised certificate deadline from BHEL's official corrigendum before submitting an application.
Frequently Asked Questions
1. How many vacancies are available under BHEL Artisan Recruitment 2027?
BHEL has announced 660 tentative Artisan Grade-IV vacancies across seven trades and nine manufacturing units.
2. What is the last date to apply?
The online application deadline is 18 November 2026 at 11:45 PM.
3. Is an ITI certificate alone sufficient?
The normal qualification requirement includes Class 10, NTC/ITI and NAC in the relevant trade. Candidates claiming an accepted Ex-Servicemen trade equivalency should refer to the separate certificate provisions.
4. Has the ITI/NAC qualification deadline changed?
A corrigendum reported on 26 October 2026 revises the deadline for acquiring the requisite certificates or marksheets to the date of Document Verification cum Skill Test. Applicants should confirm the original document on BHEL Careers.
5. What is the salary for a BHEL Artisan?
The initial one-year Temporary Artisan period carries consolidated wages of ₹24,000 per month. After successful regularisation, the notified pay scale is ₹29,500–₹65,000 with applicable allowances.
6. Can I apply for two manufacturing units?
No. The notification permits selection of only one manufacturing unit and one trade.
7. Is there an Ex-Servicemen reservation?
Yes. The unit-wise table identifies 90 Ex-Servicemen vacancies within the overall recruitment, subject to the applicable reservation and eligibility rules.
8. Can I request a transfer after joining?
The advertisement requires service at the allotted unit for at least 20 years and generally does not entertain transfer requests during that period. Its limited exception is subject to specific conditions and should not be treated as a guaranteed transfer option.
Important Official Links
PurposeLink
Official Recruitment WebsiteBHEL Careers
Detailed Advertisement No. 01/2026Download BHEL Artisan Detailed Notification (PDF)
Apply OnlineVisit BHEL Careers and select Artisan Recruitment – 2027
Latest Corrigendum and FAQsCheck BHEL Careers
Examination Pattern and SyllabusCheck Official BHEL Recruitment Documents
Age CalculatorExamPrep India Age Calculator
For further recruitment announcements, visit ExamPrep India — Latest Exam Updates.
You can also follow ExamPrep India on Facebook or join our Telegram channel for recruitment information.
Final Reminder
BHEL Artisan Recruitment 2027 offers 660 opportunities across seven technical trades. Before applying, candidates should confirm their trade qualifications, review the latest corrigendum, select a suitable manufacturing unit and understand the long-term posting condition.
The application deadline is 18 November 2026 at 11:45 PM.
Official source: Bharat Heavy Electricals Limited, Artisan Recruitment – 2027, Advertisement No. 01/2026. The detailed advertisement and latest applicable official corrigenda take precedence over this independent informational article.